MFJ 269C SWR ANALYZER ANTENNA

 MFJ-269C covers 530KHz to 230 MHz and 415 to 470 MHz -- an MFJ-269C exclusive! Includes all the features of MFJ-259C, the world’s most popular SWR Analyzer plus much more. Large easy-to-read two line LCD display and side-by-side meters clearly display your information. Built-in Ni-Cad/Ni-MH charger circuit, battery saver, low battery warning, smooth reduction drive tuning.Use as signal source for testing/alignment. Built-in CoaxCalculator -- calculates coax line length in feet given coax length in electrical degrees and vice versa for any frequency and any velocity factor (great for building matching sections and phasing lines) -- an MFJ-269C exclusive! New 12-bit A/D converter gives much better accuracy and resolution than common 8-bit A/D converters -- an MFJ-269C exclusive! Super easy to use! Just set the bandswitch and tune the dial -- just like your transceiver.

530 KHz to 230 MHz Range Features

• MFJ-269C gives you a complete picture of your antenna. Read antenna SWR and Complex Imped-ance 530 KHz to 230 MHz. Built-in frequency counter.
• Lower band is retuneable to cover 470-940 KHz for maritime and 600 Meters. 
• Read Complex Impedance as series equivalent resistance and reactance (Rs+jXs) or as magnitude (Z) and phase (degrees). 
• Also reads parallel equivalent resistance and reactance (Rp+jXp) --MFJ-269C exclusive!
• Determine velocity factor, coax loss in dB, length of coax and distance to short/open in feet.
• Read SWR, return loss and reflection coefficient at any frequency simultaneously at a single glance. Also reads match efficiency.
• Also read inductance in uH and capacitance in pF at RF frequencies.
• Measure SWR and loss of coax with any characteristic impedance, 10 to over 600 Ohms, including 50, 51, 52, 53, 73, 75, 93,95,300,450 Ohms -- MFJ-269C exclusive!

415 to 470 MHz Range features

• Just plug in your UHF antenna coax, set the frequency and read SWR, return loss and reflection coefficient simultaneously. You can read coax cable loss in dB and match efficiency.
• You can adjust UHF dipoles, verticals, yagis, quads and other antennas and determine their SWR, resonant frequency and bandwidth.
• You can test and tune stubs and coax lines. You can manually determine velocity factor and impedances of transmission lines. 
• Adjust and test RF matching networks and RF amplifiers without applying power. 
• Has easy-to-read LCD logarithmic SWR bargraph and SWR meter for quick tuning. 
• Take it anywhere
• Fully portable, take it anywhere -- on remote sites, up towers, on DX-peditions.
• Has built-in “N-type” connector. 
• Includes Free N-to-SO-239 adaptor.
• Use 10 AA Ni-MH or Ni-Cad or alkaline batteries (not included -- alkalines cannot be charged internally) or 110-240 VAC with optional MFJ-1312D. 
• Compact 4W x 2D x 6 3/4H inches.
• Maritime and 600 Meter Coverage

Frequency range : 530KHz to 230 MHz and 415 to 470 MHz 

• Connector
• Unit
• Manual book