ALINCO DJ-195 HT 2M 5W TRANSCEIVER
ALINCO DJ-195 HT 2M 5W TRANCEIVER
Description
-
Alinco has created a new 2 meter HT that sets new standards in features, convenience and easy operation. The DJ-195/ 196 sports an alphanumeric display for easy memory management. It has an ergonomic design that' s " user friendly " and the 5 watt output battery is standard. You' ll be ready to travel the world with CTCSS encode+ decode, DCS and European tone bursts, all included at no extra cost. Best of all, the DJ-195/ 196 retains the proud Alinco tradition of quality construction and excellent value.
- Alphanumeric display
- 40 memory channels
- 5 watt output with standard battery
- CTCSS encode+ decode and DCS
- 13.8 VDC direct input with battery charge feature
- Direct frequency input
- S-meter
- Autodialer
- Cable Cloning
- Computer programmable ( third party software required)
- MARS/ CAP capability ( DJ-195 )
- Additional features, including theft alarm!
Alinco DJ-195
Alphanumeric Display Label channels in an easy-reading format. Display frequency, alpha label or channel number only. 40 Memory Channels Plenty of room to store your favorite simplex or repeater frequencies along with alphanumeric label, offset, CTCSS encode/ decode or DCS setting. 5 watts output The standard battery allows the DJ-195/ 196 to produce up to 5 watts. A power input port Accepts 13.8 VDC and charges the battery, but won' t allow destructive overcharge. CTCSS, DCS, Tone Bursts and DTMF Be prepared for virtually any selective calling situation or gaining access to repeaters with protected inputs. European Tone Bursts include 1000, 1450, 1750 and 2100 Hz. Direct Frequency Input Frequency entry is easy using the well-spaced keypad. S-Meter Displays relative signal strength. Cable Cloning Share identical settings among multiple DJ-195/ 196 transceivers. Saves time and ensures uniform operation. Removal Alarm The DJ-195/ 196 can be set to emit a tone when disconnected from an external power source until proper action is taken to silence the alarm. Experimental Insect Repel Feature Can the DJ-195/ 196 actually repel mosquitoes? Activate the special tone and decide for yourself! You may find the DJ-195/ 196 can " de-bug " your outdoor operating site!
Specification
-
General DJ-195 Freq. RX original status 130 to 174 F2 F3 only F2, F3, WFM Freq. TX 144-147.995 F3 Freq. Stability + / -5ppm( -10 to + 60c) Antenna Imp. 50 ohm unbalanced Supply Voltage DC 13.8V rated DC 6.0min to 16V max Ground Negative GND Current consumption TX 5W 1.2A approx. at 13.8V external source RX 200mA approx/ 300mW RX squelched 50mA approx. RX Batt.Save on 20mA app. Operating Temp. range : -10 to + 60 degrees C. Dimention w/ o projection 56( W) x 124( H) x 40 ( D) Weight with drycellcase+ cell N/ a Transmitter Output power 5W 13.8V or EBP48N Low 0.5W Modulation Variable reactance Max. Deviation n/ a Spurious emission less than -60db Microphone Imp. 2k ohms approx. Receiver Circuit Double superheterodyne 1st IF freq. 21.7Mhz 2nd IF freq. 450khz Sensitivity 12db SINAD better than -8dbu ( 0.2uV or less) Selectivity except WFM more than -6db/ 12khz less than -60db/ 28khz Image/ spurious response less than -60db AF out at 10% distort. 13.8V Max 300mW AF impedance 8 ohms Expandible RX range none MARS/ CAP mod. Yes DTMF tone encode DCS SQ enc/ dec CTCSS SQ Enc/ Dec 39tones Memory ch. 40ch non expandible Auto Dialer memory memory 9 memories, max 16 characters/ memory Call channel Yes In The Box
-
- Unit alinco DJ-195
- Battery EBP – 51N
- Ac adaptor EDC – 100
- Battery charger EDC -97A rapid charger
- Antenna
- Beltclip
- Strap
- Manual book