GME ELECTROPHONE AE-2000 + SPL-001
GME ELECTROPHONE AE-2000
Description
-
The GME AE2000 three element broadband clover leaf TV/FM antenna has been designed specifically for marine and mobile land use. The unique broad band clover leaf element design ensures good balanced reception of all TV channels (ABC, commercials and SBS) whether on VHF (bands 1 and 3) or UHF (bands 4 and 5). In addition, the AE2000 picks up FM radio signals which may be fed to your boat or vehicle’s stereo system. The AE2000 is also fully digital TV ready. Unlike conventional TV antennas, the AE2000 is non-directional, so it will continue to give good reception if your boat changes course or swings at anchor. For land use, there is no requirement to swing the antenna for best results at each new site or when changing between stations lying in different directions. The AE2000 has a built in amplifier which combines the latest field effect and bipolar transistor technology. This gives minimum noise (snow) on weak signals and also avoids patterning interference etc., due to overload caused by strong signals from nearby transmitters. The amplifier is protected against damage from static, supply surges or accidental reverse polarity. The antenna and amplifier are mounted in a weatherproof plastic radome. This is UV stabilised to resist deterioration due to prolonged exposure to sunlight. All screws and bolts are high grade stainless steel to prevent corrosion in the harsh marine environment. A 10 metre length of high quality white coaxial cable carries 12 V DC to power the built-in amplifier and feeds TV and FM radio signals from the antenna to the required location in the boat or vehicle.
Specification
-
Antenna Type : 3 element clover leaf. Frequency Range : VHF TV bands 1 & 3 - 40 MHz to 220 MHz. : UHF TV bands 4 & 5 - 470 MHz to 860 MHz. : FM radio band - 88 MHz to108 MHz. Polarisation : Horizontal. Pick Up Pattern : Omni directional. Amplifier : FET and bipolar. Gain : 20 dB + or - 2 dB. Noise Figure : 2 dB. Output Impedance : 75 Ohms. Supply Voltage : 10.5 - 14.5V DC negative ground, reverse polarity and surge protected. Current Consumption : 35 mA typical. Connector : Standard ‘F’ type external or coaxial clamp internal. Download : 10 metres white 75 Ohms coaxial cable type RG59B/U with fitted weatherproof ‘F’ connector. Radome : White polypropylene UV stabilised plastic, 460 mm dia, 100 mm high. Mounting : Accepts 1” (25 mm) standard dia. tube (450 mm alloy mast and base supplied) In The Box
-
- 1 x Instruction leaflet.
- 1 x Antenna dome assembly.
- 1 x 10 metre length white coaxial downlead with fitted waterproof ‘F’ connector.
- 1 x Coaxial connector, screw on solderless ‘F’ type.
- 1 x DC power injector assembly.
- 2 x Moulded bases to accept 25 mm (1”) tube.
- 1 x 25 mm (1”) dia. x 450 mm (18”) long aluminium support tube.
- 2 x Slope adjusting wedge spacers.
- 1 x Cable tie.
- 3 x M5 x 40 mm stainless steel Philips head bolts
- 4 x 1/4 inch x 16 mm stainless steel grub screws.
- 1 x Allen key for grub screws.